|
Xpert2/9210B Xterm
File Name: Xpert2_v3.22.0.19.zip
|
3.22.0.19 |
-
|
Feb 23, 2018 |
10.25MB |
Upgrade Xpert2/9210B using Xterm Change History
Upgrade Xpert2/9210B using Xterm Change History - Added transmit over LAN.
- Added retransmit up to 7 days, with ability to retrieve data from log.
- Improved GPRS and Hydromet Cloud transmission reliability.
- Simplified GPRS configuration.
- Added support for EUMET satellite types when used with Satlink.
- Many more minor improvements and bug fixes.
Show Revision History
Revision & Release Date
3.21.0.3
Feb 23, 2018
10.25MB
Show Details
Upgrade Xpert2/9210B using Xterm
Change History
- Added support for SNTP time-synchronization
- Added ASCII Column format option to GPRS, Iridium, and Satlink transmissions
- Fixed a bug in the Modbus serial client (MBSensor and MBOut blocks), where blocks scheduled to run at the same time could eventually result in a failure to retrieve all the data for a scheduled slot. In this error case, the system would report, “Failed obtaining port lock”
- Fixed a bug where use of a log immediately following its creation (i.e., without rebooting the system), would cause a crash. This bug was introduced in 3.19.0.8.
3.21.0.3
Jan 31, 2017
10.17MB
Show Details
Upgrade Xpert2/9210B using Xterm
Change History
- Added support for SNTP time-synchronization
- Added ASCII Column format option to GPRS, Iridium, and Satlink transmissions
- Fixed a bug in the Modbus serial client (MBSensor and MBOut blocks), where blocks scheduled to run at the same time could eventually result in a failure to retrieve all the data for a scheduled slot. In this error case, the system would report, “Failed obtaining port lock”
- Fixed a bug where use of a log immediately following its creation (i.e., without rebooting the system), would cause a crash. This bug was introduced in 3.19.0.8.
3.21.0.3
Jan 31, 2017
10.17MB
Show Details
Upgrade using Xterm
Change History
- Added support for SNTP time-synchronization
- Added ASCII Column format option to GPRS, Iridium, and Satlink transmissions
- Fixed a bug in the Modbus serial client (MBSensor and MBOut blocks), where blocks scheduled to run at the same time could eventually result in a failure to retrieve all the data for a scheduled slot. In this error case, the system would report, “Failed obtaining port lock”
- Fixed a bug where use of a log immediately following its creation (i.e., without rebooting the system), would cause a crash. This bug was introduced in 3.19.0.8.
3.21.0.3
Jan 31, 2017
10.17MB
Show Details
SD Card Upgrade
Change History
- Added support for SNTP time-synchronization
- Added ASCII Column format option to GPRS, Iridium, and Satlink transmissions
- Fixed a bug in the Modbus serial client (MBSensor and MBOut blocks), where blocks scheduled to run at the same time could eventually result in a failure to retrieve all the data for a scheduled slot. In this error case, the system would report, “Failed obtaining port lock”
- Fixed a bug where use of a log immediately following its creation (i.e., without rebooting the system), would cause a crash. This bug was introduced in 3.19.0.8.
3.21.0.3
Jan 31, 2017
10.17MB
Show Details
SD Card Upgrade
Change History
- Added support for SNTP time-synchronization
- Added ASCII Column format option to GPRS, Iridium, and Satlink transmissions
- Fixed a bug in the Modbus serial client (MBSensor and MBOut blocks), where blocks scheduled to run at the same time could eventually result in a failure to retrieve all the data for a scheduled slot. In this error case, the system would report, “Failed obtaining port lock”
- Fixed a bug where use of a log immediately following its creation (i.e., without rebooting the system), would cause a crash. This bug was introduced in 3.19.0.8.
3.21.0.3
Jan 31, 2017
10.17MB
Show Details
Change History - Added support for SNTP time-synchronization
- Added ASCII Column format option to GPRS, Iridium, and Satlink transmissions
- Fixed a bug in the Modbus serial client (MBSensor and MBOut blocks), where blocks scheduled to run at the same time could eventually result in a failure to retrieve all the data for a scheduled slot. In this error case, the system would report, “Failed obtaining port lock”
- Fixed a bug where use of a log immediately following its creation (i.e., without rebooting the system), would cause a crash. This bug was introduced in 3.19.0.8.
3.20.0.8
Jan 10, 2017
10.17MB
Show Details
Change highlights:
- Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.19.0.10
Dec 6, 2016
10.15MB
Show Details
Change highlights:
- Fixed bugs in GPRS SLL that could lead to communications lockup
- Minor improvements to LEADS and Nortek SLLs
- Prompt user to turn off recording when resizing or clearing a log
- Fixed minor memory leaks
- And more!
3.19.0.10
Jun 30, 2016
10.14MB
Show Details
Change highlights:
- Fixed bugs in GPRS SLL that could lead to communications lockup
- Minor improvements to LEADS and Nortek SLLs
- Prompt user to turn off recording when resizing or clearing a log
- Fixed minor memory leaks
- And more!
3.19.0.10
Jun 30, 2016
10.14MB
Show Details
Change highlights:
- Fixed bugs in GPRS SLL that could lead to communications lockup
- Minor improvements to LEADS and Nortek SLLs
- Prompt user to turn off recording when resizing or clearing a log
- Fixed minor memory leaks
- And more!
3.18.0.12
Jun 14, 2016
10.14MB
Show Details
Change Highlights
1. Enhancements to RS232 block
2. Added support for HSPA/HSPDA/3G cell modem
3. Enhancements to NOS formatter
4. Added support for Japan MTSAT 100 and 300 BPS satellite types for use with Satlink
5. And more!
3.17.0.18
Oct 30, 2015
10.10MB
Show Details
Change Highlights
1. Fixed a bug in GPRS.SLL where PwrOnAction of “Connect” was being ignored
2. Fixed bug in SSP time-tag reporting format that reports multiple sensors at once
3. Updates made to SDRAM speed and management to address issues with newer SDRAM memories
4. Improvements to Iridium: a) Added station name to header; b) Added fall-back on GPRS failure
5. NOS formatter now frames data relative to real-time, rather than to PWL timestamp, to ensure consistent data sets across frames
6. Added new Nortek SLL and block to support Nortek AWAC and AquaDopp family of sensors
7. Added sensor input block to support AirMar PB200 MET station
8. ET block now allows user to specify an “Hour to Compute” option
9. Fixed a bug that broke the Basic Web_Manager function
3.16.0.9
Jan 23, 2015
10.05MB
3.16.0.9
Oct 29, 2014
10.05MB
3.16.0.8
Sep 2, 2014
10.05MB
3.16.0.6
Jul 25, 2014
10.05MB
3.16.0.6
Jul 25, 2014
10.05MB
3.15.0.5
Jul 20, 2014
10.03MB
|
|
Xpert2/9210B Xterm
File Name: Xpert2_v3.22.0.19.zip
|
3.22.0.19 |
9210-0000-...
9210-0000-2B 9210-0000-3B 9210-ENC-B 9210-SL2-ENC-B 9210-SL2-ENC-M 9210-0000-3B 9210-SL2-2B
|
Feb 23, 2018 |
10.25MB |
Upgrade Xpert2/9210B using Xterm Change History
Upgrade Xpert2/9210B using Xterm Change History - Added transmit over LAN.
- Added retransmit up to 7 days, with ability to retrieve data from log.
- Improved GPRS and Hydromet Cloud transmission reliability.
- Simplified GPRS configuration.
- Added support for EUMET satellite types when used with Satlink.
- Many more minor improvements and bug fixes.
Show Revision History
Revision & Release Date
3.21.0.3
Feb 23, 2018
10.25MB
Show Details
Upgrade Xpert2/9210B using Xterm
Change History
- Added support for SNTP time-synchronization
- Added ASCII Column format option to GPRS, Iridium, and Satlink transmissions
- Fixed a bug in the Modbus serial client (MBSensor and MBOut blocks), where blocks scheduled to run at the same time could eventually result in a failure to retrieve all the data for a scheduled slot. In this error case, the system would report, “Failed obtaining port lock”
- Fixed a bug where use of a log immediately following its creation (i.e., without rebooting the system), would cause a crash. This bug was introduced in 3.19.0.8.
3.21.0.3
Jan 31, 2017
10.17MB
Show Details
Upgrade Xpert2/9210B using Xterm
Change History
- Added support for SNTP time-synchronization
- Added ASCII Column format option to GPRS, Iridium, and Satlink transmissions
- Fixed a bug in the Modbus serial client (MBSensor and MBOut blocks), where blocks scheduled to run at the same time could eventually result in a failure to retrieve all the data for a scheduled slot. In this error case, the system would report, “Failed obtaining port lock”
- Fixed a bug where use of a log immediately following its creation (i.e., without rebooting the system), would cause a crash. This bug was introduced in 3.19.0.8.
3.21.0.3
Jan 31, 2017
10.17MB
Show Details
Upgrade using Xterm
Change History
- Added support for SNTP time-synchronization
- Added ASCII Column format option to GPRS, Iridium, and Satlink transmissions
- Fixed a bug in the Modbus serial client (MBSensor and MBOut blocks), where blocks scheduled to run at the same time could eventually result in a failure to retrieve all the data for a scheduled slot. In this error case, the system would report, “Failed obtaining port lock”
- Fixed a bug where use of a log immediately following its creation (i.e., without rebooting the system), would cause a crash. This bug was introduced in 3.19.0.8.
3.21.0.3
Jan 31, 2017
10.17MB
Show Details
SD Card Upgrade
Change History
- Added support for SNTP time-synchronization
- Added ASCII Column format option to GPRS, Iridium, and Satlink transmissions
- Fixed a bug in the Modbus serial client (MBSensor and MBOut blocks), where blocks scheduled to run at the same time could eventually result in a failure to retrieve all the data for a scheduled slot. In this error case, the system would report, “Failed obtaining port lock”
- Fixed a bug where use of a log immediately following its creation (i.e., without rebooting the system), would cause a crash. This bug was introduced in 3.19.0.8.
3.21.0.3
Jan 31, 2017
10.17MB
Show Details
SD Card Upgrade
Change History
- Added support for SNTP time-synchronization
- Added ASCII Column format option to GPRS, Iridium, and Satlink transmissions
- Fixed a bug in the Modbus serial client (MBSensor and MBOut blocks), where blocks scheduled to run at the same time could eventually result in a failure to retrieve all the data for a scheduled slot. In this error case, the system would report, “Failed obtaining port lock”
- Fixed a bug where use of a log immediately following its creation (i.e., without rebooting the system), would cause a crash. This bug was introduced in 3.19.0.8.
3.21.0.3
Jan 31, 2017
10.17MB
Show Details
Change History - Added support for SNTP time-synchronization
- Added ASCII Column format option to GPRS, Iridium, and Satlink transmissions
- Fixed a bug in the Modbus serial client (MBSensor and MBOut blocks), where blocks scheduled to run at the same time could eventually result in a failure to retrieve all the data for a scheduled slot. In this error case, the system would report, “Failed obtaining port lock”
- Fixed a bug where use of a log immediately following its creation (i.e., without rebooting the system), would cause a crash. This bug was introduced in 3.19.0.8.
3.20.0.8
Jan 10, 2017
10.17MB
Show Details
Change highlights:
- Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.19.0.10
Dec 6, 2016
10.15MB
Show Details
Change highlights:
- Fixed bugs in GPRS SLL that could lead to communications lockup
- Minor improvements to LEADS and Nortek SLLs
- Prompt user to turn off recording when resizing or clearing a log
- Fixed minor memory leaks
- And more!
3.19.0.10
Jun 30, 2016
10.14MB
Show Details
Change highlights:
- Fixed bugs in GPRS SLL that could lead to communications lockup
- Minor improvements to LEADS and Nortek SLLs
- Prompt user to turn off recording when resizing or clearing a log
- Fixed minor memory leaks
- And more!
3.19.0.10
Jun 30, 2016
10.14MB
Show Details
Change highlights:
- Fixed bugs in GPRS SLL that could lead to communications lockup
- Minor improvements to LEADS and Nortek SLLs
- Prompt user to turn off recording when resizing or clearing a log
- Fixed minor memory leaks
- And more!
3.18.0.12
Jun 14, 2016
10.14MB
Show Details
Change Highlights
1. Enhancements to RS232 block
2. Added support for HSPA/HSPDA/3G cell modem
3. Enhancements to NOS formatter
4. Added support for Japan MTSAT 100 and 300 BPS satellite types for use with Satlink
5. And more!
3.17.0.18
Oct 30, 2015
10.10MB
Show Details
Change Highlights
1. Fixed a bug in GPRS.SLL where PwrOnAction of “Connect” was being ignored
2. Fixed bug in SSP time-tag reporting format that reports multiple sensors at once
3. Updates made to SDRAM speed and management to address issues with newer SDRAM memories
4. Improvements to Iridium: a) Added station name to header; b) Added fall-back on GPRS failure
5. NOS formatter now frames data relative to real-time, rather than to PWL timestamp, to ensure consistent data sets across frames
6. Added new Nortek SLL and block to support Nortek AWAC and AquaDopp family of sensors
7. Added sensor input block to support AirMar PB200 MET station
8. ET block now allows user to specify an “Hour to Compute” option
9. Fixed a bug that broke the Basic Web_Manager function
3.16.0.9
Jan 23, 2015
10.05MB
3.16.0.9
Oct 29, 2014
10.05MB
3.16.0.8
Sep 2, 2014
10.05MB
3.16.0.6
Jul 25, 2014
10.05MB
3.16.0.6
Jul 25, 2014
10.05MB
3.15.0.5
Jul 20, 2014
10.03MB
|
|
Xpert2/9210B Xterm
File Name: Xpert2_v3.22.0.19.zip
|
3.22.0.19 |
8080-0000-...
8080-0000-1B 8080-0000-2B 8080-0001-1B 8080-0001-2B
|
Feb 23, 2018 |
10.25MB |
Upgrade Xpert2/9210B using Xterm Change History
Upgrade Xpert2/9210B using Xterm Change History - Added transmit over LAN.
- Added retransmit up to 7 days, with ability to retrieve data from log.
- Improved GPRS and Hydromet Cloud transmission reliability.
- Simplified GPRS configuration.
- Added support for EUMET satellite types when used with Satlink.
- Many more minor improvements and bug fixes.
Show Revision History
Revision & Release Date
3.21.0.3
Feb 23, 2018
10.25MB
Show Details
Upgrade Xpert2/9210B using Xterm
Change History
- Added support for SNTP time-synchronization
- Added ASCII Column format option to GPRS, Iridium, and Satlink transmissions
- Fixed a bug in the Modbus serial client (MBSensor and MBOut blocks), where blocks scheduled to run at the same time could eventually result in a failure to retrieve all the data for a scheduled slot. In this error case, the system would report, “Failed obtaining port lock”
- Fixed a bug where use of a log immediately following its creation (i.e., without rebooting the system), would cause a crash. This bug was introduced in 3.19.0.8.
3.21.0.3
Jan 31, 2017
10.17MB
Show Details
Upgrade Xpert2/9210B using Xterm
Change History
- Added support for SNTP time-synchronization
- Added ASCII Column format option to GPRS, Iridium, and Satlink transmissions
- Fixed a bug in the Modbus serial client (MBSensor and MBOut blocks), where blocks scheduled to run at the same time could eventually result in a failure to retrieve all the data for a scheduled slot. In this error case, the system would report, “Failed obtaining port lock”
- Fixed a bug where use of a log immediately following its creation (i.e., without rebooting the system), would cause a crash. This bug was introduced in 3.19.0.8.
3.21.0.3
Jan 31, 2017
10.17MB
Show Details
Upgrade using Xterm
Change History
- Added support for SNTP time-synchronization
- Added ASCII Column format option to GPRS, Iridium, and Satlink transmissions
- Fixed a bug in the Modbus serial client (MBSensor and MBOut blocks), where blocks scheduled to run at the same time could eventually result in a failure to retrieve all the data for a scheduled slot. In this error case, the system would report, “Failed obtaining port lock”
- Fixed a bug where use of a log immediately following its creation (i.e., without rebooting the system), would cause a crash. This bug was introduced in 3.19.0.8.
3.21.0.3
Jan 31, 2017
10.17MB
Show Details
SD Card Upgrade
Change History
- Added support for SNTP time-synchronization
- Added ASCII Column format option to GPRS, Iridium, and Satlink transmissions
- Fixed a bug in the Modbus serial client (MBSensor and MBOut blocks), where blocks scheduled to run at the same time could eventually result in a failure to retrieve all the data for a scheduled slot. In this error case, the system would report, “Failed obtaining port lock”
- Fixed a bug where use of a log immediately following its creation (i.e., without rebooting the system), would cause a crash. This bug was introduced in 3.19.0.8.
3.21.0.3
Jan 31, 2017
10.17MB
Show Details
SD Card Upgrade
Change History
- Added support for SNTP time-synchronization
- Added ASCII Column format option to GPRS, Iridium, and Satlink transmissions
- Fixed a bug in the Modbus serial client (MBSensor and MBOut blocks), where blocks scheduled to run at the same time could eventually result in a failure to retrieve all the data for a scheduled slot. In this error case, the system would report, “Failed obtaining port lock”
- Fixed a bug where use of a log immediately following its creation (i.e., without rebooting the system), would cause a crash. This bug was introduced in 3.19.0.8.
3.21.0.3
Jan 31, 2017
10.17MB
Show Details
Change History - Added support for SNTP time-synchronization
- Added ASCII Column format option to GPRS, Iridium, and Satlink transmissions
- Fixed a bug in the Modbus serial client (MBSensor and MBOut blocks), where blocks scheduled to run at the same time could eventually result in a failure to retrieve all the data for a scheduled slot. In this error case, the system would report, “Failed obtaining port lock”
- Fixed a bug where use of a log immediately following its creation (i.e., without rebooting the system), would cause a crash. This bug was introduced in 3.19.0.8.
3.20.0.8
Jan 10, 2017
10.17MB
Show Details
Change highlights:
- Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.19.0.10
Dec 6, 2016
10.15MB
Show Details
Change highlights:
- Fixed bugs in GPRS SLL that could lead to communications lockup
- Minor improvements to LEADS and Nortek SLLs
- Prompt user to turn off recording when resizing or clearing a log
- Fixed minor memory leaks
- And more!
3.19.0.10
Jun 30, 2016
10.14MB
Show Details
Change highlights:
- Fixed bugs in GPRS SLL that could lead to communications lockup
- Minor improvements to LEADS and Nortek SLLs
- Prompt user to turn off recording when resizing or clearing a log
- Fixed minor memory leaks
- And more!
3.19.0.10
Jun 30, 2016
10.14MB
Show Details
Change highlights:
- Fixed bugs in GPRS SLL that could lead to communications lockup
- Minor improvements to LEADS and Nortek SLLs
- Prompt user to turn off recording when resizing or clearing a log
- Fixed minor memory leaks
- And more!
3.18.0.12
Jun 14, 2016
10.14MB
Show Details
Change Highlights
1. Enhancements to RS232 block
2. Added support for HSPA/HSPDA/3G cell modem
3. Enhancements to NOS formatter
4. Added support for Japan MTSAT 100 and 300 BPS satellite types for use with Satlink
5. And more!
3.17.0.18
Oct 30, 2015
10.10MB
Show Details
Change Highlights
1. Fixed a bug in GPRS.SLL where PwrOnAction of “Connect” was being ignored
2. Fixed bug in SSP time-tag reporting format that reports multiple sensors at once
3. Updates made to SDRAM speed and management to address issues with newer SDRAM memories
4. Improvements to Iridium: a) Added station name to header; b) Added fall-back on GPRS failure
5. NOS formatter now frames data relative to real-time, rather than to PWL timestamp, to ensure consistent data sets across frames
6. Added new Nortek SLL and block to support Nortek AWAC and AquaDopp family of sensors
7. Added sensor input block to support AirMar PB200 MET station
8. ET block now allows user to specify an “Hour to Compute” option
9. Fixed a bug that broke the Basic Web_Manager function
3.16.0.9
Jan 23, 2015
10.05MB
3.16.0.9
Oct 29, 2014
10.05MB
3.16.0.8
Sep 2, 2014
10.05MB
3.16.0.6
Jul 25, 2014
10.05MB
3.16.0.6
Jul 25, 2014
10.05MB
3.15.0.5
Jul 20, 2014
10.03MB
|
|
Xpert2/9210B Offline Setup
File Name: Xpert2_v3.22.0.19_Offline.zip
|
3.22.0.19 |
-
|
Feb 23, 2018 |
19.40MB |
Offline setup for PC Change History
Offline setup for PC Change History - Added transmit over LAN.
- Added retransmit up to 7 days, with ability to retrieve data from log.
- Improved GPRS and Hydromet Cloud transmission reliability.
- Simplified GPRS configuration.
- Added support for EUMET satellite types when used with Satlink.
- Many more minor improvements and bug fixes.
Show Revision History
Revision & Release Date
3.21.0.3
Feb 23, 2018
19.40MB
Show Details
Offline setup for PC Change History - Added support for SNTP time-synchronization
- Added ASCII Column format option to GPRS, Iridium, and Satlink transmissions
- Fixed a bug in the Modbus serial client (MBSensor and MBOut blocks), where blocks scheduled to run at the same time could eventually result in a failure to retrieve all the data for a scheduled slot. In this error case, the system would report, “Failed obtaining port lock”
- Fixed a bug where use of a log immediately following its creation (i.e., without rebooting the system), would cause a crash. This bug was introduced in 3.19.0.8.
3.20.0.8
Jan 10, 2017
19.27MB
Show Details
Offline setup for PC Change highlights: - Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 3, 2017
0 B
Show Details
Offline setup for PC Change highlights: - Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 3, 2017
0 B
Show Details
Offline setup for PC Change highlights: - Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 3, 2017
0 B
Show Details
Change highlights:
- Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.19.0.10
Dec 6, 2016
0 B
Show Details
Change highlights:
- Fixed bugs in GPRS SLL that could lead to communications lockup
- Minor improvements to LEADS and Nortek SLLs
- Prompt user to turn off recording when resizing or clearing a log
- Fixed minor memory leaks
- And more!
3.19.0.10
Jun 30, 2016
0 B
Show Details
Change highlights:
- Fixed bugs in GPRS SLL that could lead to communications lockup
- Minor improvements to LEADS and Nortek SLLs
- Prompt user to turn off recording when resizing or clearing a log
- Fixed minor memory leaks
- And more!
3.19.0.10
Jun 30, 2016
0 B
Show Details
Change highlights:
- Fixed bugs in GPRS SLL that could lead to communications lockup
- Minor improvements to LEADS and Nortek SLLs
- Prompt user to turn off recording when resizing or clearing a log
- Fixed minor memory leaks
- And more!
3.18.0.12
Jun 14, 2016
0 B
3.17.0.18
Nov 2, 2015
19.24MB
3.16.0.9
Jan 23, 2015
19.17MB
3.16.0.9
Oct 29, 2014
19.17MB
3.16.0.8
Sep 2, 2014
19.17MB
3.16.0.6
Jul 25, 2014
19.17MB
3.16.0.6
Jul 25, 2014
19.17MB
3.15.0.5
Jul 20, 2014
19.15MB
|
|
Xpert2/9210B Offline Setup
File Name: Xpert2_v3.22.0.19_Offline.zip
|
3.22.0.19 |
9210-0000-...
9210-0000-2B 9210-0000-3B 9210-ENC-B 9210-SL2-ENC-B 9210-SL2-ENC-M 9210-0000-3B 9210-SL2-2B
|
Feb 23, 2018 |
19.40MB |
Offline setup for PC Change History
Offline setup for PC Change History - Added transmit over LAN.
- Added retransmit up to 7 days, with ability to retrieve data from log.
- Improved GPRS and Hydromet Cloud transmission reliability.
- Simplified GPRS configuration.
- Added support for EUMET satellite types when used with Satlink.
- Many more minor improvements and bug fixes.
Show Revision History
Revision & Release Date
3.21.0.3
Feb 23, 2018
19.40MB
Show Details
Offline setup for PC Change History - Added support for SNTP time-synchronization
- Added ASCII Column format option to GPRS, Iridium, and Satlink transmissions
- Fixed a bug in the Modbus serial client (MBSensor and MBOut blocks), where blocks scheduled to run at the same time could eventually result in a failure to retrieve all the data for a scheduled slot. In this error case, the system would report, “Failed obtaining port lock”
- Fixed a bug where use of a log immediately following its creation (i.e., without rebooting the system), would cause a crash. This bug was introduced in 3.19.0.8.
3.20.0.8
Jan 10, 2017
19.27MB
Show Details
Offline setup for PC Change highlights: - Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 3, 2017
0 B
Show Details
Offline setup for PC Change highlights: - Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 3, 2017
0 B
Show Details
Offline setup for PC Change highlights: - Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 3, 2017
0 B
Show Details
Change highlights:
- Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.19.0.10
Dec 6, 2016
0 B
Show Details
Change highlights:
- Fixed bugs in GPRS SLL that could lead to communications lockup
- Minor improvements to LEADS and Nortek SLLs
- Prompt user to turn off recording when resizing or clearing a log
- Fixed minor memory leaks
- And more!
3.19.0.10
Jun 30, 2016
0 B
Show Details
Change highlights:
- Fixed bugs in GPRS SLL that could lead to communications lockup
- Minor improvements to LEADS and Nortek SLLs
- Prompt user to turn off recording when resizing or clearing a log
- Fixed minor memory leaks
- And more!
3.19.0.10
Jun 30, 2016
0 B
Show Details
Change highlights:
- Fixed bugs in GPRS SLL that could lead to communications lockup
- Minor improvements to LEADS and Nortek SLLs
- Prompt user to turn off recording when resizing or clearing a log
- Fixed minor memory leaks
- And more!
3.18.0.12
Jun 14, 2016
0 B
3.17.0.18
Nov 2, 2015
19.24MB
3.16.0.9
Jan 23, 2015
19.17MB
3.16.0.9
Oct 29, 2014
19.17MB
3.16.0.8
Sep 2, 2014
19.17MB
3.16.0.6
Jul 25, 2014
19.17MB
3.16.0.6
Jul 25, 2014
19.17MB
3.15.0.5
Jul 20, 2014
19.15MB
|
|
Xpert2/9210B Offline Setup
File Name: Xpert2_v3.22.0.19_Offline.zip
|
3.22.0.19 |
8080-0000-...
8080-0000-1B 8080-0000-2B 8080-0001-1B 8080-0001-2B
|
Feb 23, 2018 |
19.40MB |
Offline setup for PC Change History
Offline setup for PC Change History - Added transmit over LAN.
- Added retransmit up to 7 days, with ability to retrieve data from log.
- Improved GPRS and Hydromet Cloud transmission reliability.
- Simplified GPRS configuration.
- Added support for EUMET satellite types when used with Satlink.
- Many more minor improvements and bug fixes.
Show Revision History
Revision & Release Date
3.21.0.3
Feb 23, 2018
19.40MB
Show Details
Offline setup for PC Change History - Added support for SNTP time-synchronization
- Added ASCII Column format option to GPRS, Iridium, and Satlink transmissions
- Fixed a bug in the Modbus serial client (MBSensor and MBOut blocks), where blocks scheduled to run at the same time could eventually result in a failure to retrieve all the data for a scheduled slot. In this error case, the system would report, “Failed obtaining port lock”
- Fixed a bug where use of a log immediately following its creation (i.e., without rebooting the system), would cause a crash. This bug was introduced in 3.19.0.8.
3.20.0.8
Jan 10, 2017
19.27MB
Show Details
Offline setup for PC Change highlights: - Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 3, 2017
0 B
Show Details
Offline setup for PC Change highlights: - Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 3, 2017
0 B
Show Details
Offline setup for PC Change highlights: - Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 3, 2017
0 B
Show Details
Change highlights:
- Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.19.0.10
Dec 6, 2016
0 B
Show Details
Change highlights:
- Fixed bugs in GPRS SLL that could lead to communications lockup
- Minor improvements to LEADS and Nortek SLLs
- Prompt user to turn off recording when resizing or clearing a log
- Fixed minor memory leaks
- And more!
3.19.0.10
Jun 30, 2016
0 B
Show Details
Change highlights:
- Fixed bugs in GPRS SLL that could lead to communications lockup
- Minor improvements to LEADS and Nortek SLLs
- Prompt user to turn off recording when resizing or clearing a log
- Fixed minor memory leaks
- And more!
3.19.0.10
Jun 30, 2016
0 B
Show Details
Change highlights:
- Fixed bugs in GPRS SLL that could lead to communications lockup
- Minor improvements to LEADS and Nortek SLLs
- Prompt user to turn off recording when resizing or clearing a log
- Fixed minor memory leaks
- And more!
3.18.0.12
Jun 14, 2016
0 B
3.17.0.18
Nov 2, 2015
19.24MB
3.16.0.9
Jan 23, 2015
19.17MB
3.16.0.9
Oct 29, 2014
19.17MB
3.16.0.8
Sep 2, 2014
19.17MB
3.16.0.6
Jul 25, 2014
19.17MB
3.16.0.6
Jul 25, 2014
19.17MB
3.15.0.5
Jul 20, 2014
19.15MB
|
|
Xpert2 O&M Manual
File Name: Xpert2 User Manual.pdf
|
3.22 |
8080-0000-...
8080-0000-1B 8080-0000-2B 8080-0001-1B 8080-0001-2B
|
Feb 23, 2018 |
3.40MB |
Show Revision History
Revision & Release Date
3.21
Jan 31, 2017
3.28MB
Show Details
Change History
- Added support for SNTP time-synchronization
- Added ASCII Column format option to GPRS, Iridium, and Satlink transmissions
- Fixed a bug in the Modbus serial client (MBSensor and MBOut blocks), where blocks scheduled to run at the same time could eventually result in a failure to retrieve all the data for a scheduled slot. In this error case, the system would report, “Failed obtaining port lock”
- Fixed a bug where use of a log immediately following its creation (i.e., without rebooting the system), would cause a crash. This bug was introduced in 3.19.0.8.
3.21
Jan 19, 2017
3.28MB
Show Details
Change History
- Added support for SNTP time-synchronization
- Added ASCII Column format option to GPRS, Iridium, and Satlink transmissions
- Fixed a bug in the Modbus serial client (MBSensor and MBOut blocks), where blocks scheduled to run at the same time could eventually result in a failure to retrieve all the data for a scheduled slot. In this error case, the system would report, “Failed obtaining port lock”
- Fixed a bug where use of a log immediately following its creation (i.e., without rebooting the system), would cause a crash. This bug was introduced in 3.19.0.8.
3.21
Jan 19, 2017
3.28MB
Show Details
Change History
- Added support for SNTP time-synchronization
- Added ASCII Column format option to GPRS, Iridium, and Satlink transmissions
- Fixed a bug in the Modbus serial client (MBSensor and MBOut blocks), where blocks scheduled to run at the same time could eventually result in a failure to retrieve all the data for a scheduled slot. In this error case, the system would report, “Failed obtaining port lock”
- Fixed a bug where use of a log immediately following its creation (i.e., without rebooting the system), would cause a crash. This bug was introduced in 3.19.0.8.
3.21
Jan 19, 2017
3.28MB
Show Details
Change History
- Added support for SNTP time-synchronization
- Added ASCII Column format option to GPRS, Iridium, and Satlink transmissions
- Fixed a bug in the Modbus serial client (MBSensor and MBOut blocks), where blocks scheduled to run at the same time could eventually result in a failure to retrieve all the data for a scheduled slot. In this error case, the system would report, “Failed obtaining port lock”
- Fixed a bug where use of a log immediately following its creation (i.e., without rebooting the system), would cause a crash. This bug was introduced in 3.19.0.8.
3.21
Jan 19, 2017
3.28MB
Show Details
Change History - Added support for SNTP time-synchronization
- Added ASCII Column format option to GPRS, Iridium, and Satlink transmissions
- Fixed a bug in the Modbus serial client (MBSensor and MBOut blocks), where blocks scheduled to run at the same time could eventually result in a failure to retrieve all the data for a scheduled slot. In this error case, the system would report, “Failed obtaining port lock”
- Fixed a bug where use of a log immediately following its creation (i.e., without rebooting the system), would cause a crash. This bug was introduced in 3.19.0.8.
3.20
Jan 10, 2017
3.28MB
Show Details
Change highlights:
- Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.19
Dec 6, 2016
3.27MB
Show Details
Change highlights:
- Fixed bugs in GPRS SLL that could lead to communications lockup
- Minor improvements to LEADS and Nortek SLLs
- Prompt user to turn off recording when resizing or clearing a log
- Fixed minor memory leaks
- And more!
|
|
Xpert2/9210B SD Card
File Name: Xpert2_v3.22.0.19_SC.zip
|
3.22.0.19 |
-
|
Feb 23, 2018 |
9.89MB |
Upgrade Xpert2/9210B using SD Card Change History
Upgrade Xpert2/9210B using SD Card Change History - Added transmit over LAN.
- Added retransmit up to 7 days, with ability to retrieve data from log.
- Improved GPRS and Hydromet Cloud transmission reliability.
- Simplified GPRS configuration.
- Added support for EUMET satellite types when used with Satlink.
- Many more minor improvements and bug fixes.
Show Revision History
Revision & Release Date
3.21.0.3
Feb 23, 2018
9.89MB
Show Details
Upgrade Xpert2/9210B using SD Card
Change History
- Added support for SNTP time-synchronization
- Added ASCII Column format option to GPRS, Iridium, and Satlink transmissions
- Fixed a bug in the Modbus serial client (MBSensor and MBOut blocks), where blocks scheduled to run at the same time could eventually result in a failure to retrieve all the data for a scheduled slot. In this error case, the system would report, “Failed obtaining port lock”
- Fixed a bug where use of a log immediately following its creation (i.e., without rebooting the system), would cause a crash. This bug was introduced in 3.19.0.8.
3.21.0.3
Jan 31, 2017
9.80MB
Show Details
Upgrade Xpert2/9210B using SD Card
Change History
- Added support for SNTP time-synchronization
- Added ASCII Column format option to GPRS, Iridium, and Satlink transmissions
- Fixed a bug in the Modbus serial client (MBSensor and MBOut blocks), where blocks scheduled to run at the same time could eventually result in a failure to retrieve all the data for a scheduled slot. In this error case, the system would report, “Failed obtaining port lock”
- Fixed a bug where use of a log immediately following its creation (i.e., without rebooting the system), would cause a crash. This bug was introduced in 3.19.0.8.
3.21.0.3
Jan 31, 2017
9.80MB
Show Details
SD Card Upgrade Change History - Added support for SNTP time-synchronization
- Added ASCII Column format option to GPRS, Iridium, and Satlink transmissions
- Fixed a bug in the Modbus serial client (MBSensor and MBOut blocks), where blocks scheduled to run at the same time could eventually result in a failure to retrieve all the data for a scheduled slot. In this error case, the system would report, “Failed obtaining port lock”
- Fixed a bug where use of a log immediately following its creation (i.e., without rebooting the system), would cause a crash. This bug was introduced in 3.19.0.8.
3.20.0.8
Jan 10, 2017
9.80MB
Show Details
SD Card Upgrade
Change Highlights:
- Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 10, 2017
0 B
Show Details
SD Card Upgrade
Change highlights:
- Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 10, 2017
0 B
Show Details
SD Card Upgrade Change highlights: - Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 10, 2017
0 B
Show Details
SD card upgrade
Change highlights:
- Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 10, 2017
0 B
Show Details
SD card upgrade
Change highlights:
- Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 10, 2017
0 B
Show Details
SD card upgrade
Change highlights:
- Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 3, 2017
0 B
Show Details
SD card upgrade
Change highlights:
- Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 3, 2017
0 B
Show Details
SD card upgrade
Change highlights:
- Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 3, 2017
0 B
Show Details
SD card upgrade Change highlights: - Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 3, 2017
0 B
Show Details
SD card upgrade Change highlights: - Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 3, 2017
0 B
Show Details
SD card upgrade Change highlights: - Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 3, 2017
0 B
Show Details
SD card upgrade Change highlights: - Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 3, 2017
0 B
Show Details
Change highlights:
- Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.19.0.10
Dec 6, 2016
0 B
Show Details
Change highlights:
- Fixed bugs in GPRS SLL that could lead to communications lockup
- Minor improvements to LEADS and Nortek SLLs
- Prompt user to turn off recording when resizing or clearing a log
- Fixed minor memory leaks
- And more!
3.19.0.10
Jun 30, 2016
9.78MB
Show Details
Change highlights:
- Fixed bugs in GPRS SLL that could lead to communications lockup
- Minor improvements to LEADS and Nortek SLLs
- Prompt user to turn off recording when resizing or clearing a log
- Fixed minor memory leaks
- And more!
3.18.0.12
Jun 14, 2016
9.78MB
3.17.0.18
Oct 30, 2015
9.74MB
3.16.0.9
Jan 23, 2015
9.69MB
3.16.0.9
Oct 29, 2014
9.69MB
3.16.0.8
Sep 2, 2014
9.69MB
3.16.0.6
Jul 25, 2014
9.69MB
3.16.0.6
Jul 25, 2014
9.69MB
3.15.0.5
Jul 20, 2014
9.67MB
Apr 2, 2014
9.67MB
Show Details
8204-1091, file is labeled "SC" for storage card
|
|
Xpert2/9210B SD Card
File Name: Xpert2_v3.22.0.19_SC.zip
|
3.22.0.19 |
9210-0000-...
9210-0000-2B 9210-0000-3B 9210-ENC-B 9210-SL2-ENC-B 9210-SL2-ENC-M 9210-0000-3B 9210-SL2-2B
|
Feb 23, 2018 |
9.89MB |
Upgrade Xpert2/9210B using SD Card Change History
Upgrade Xpert2/9210B using SD Card Change History - Added transmit over LAN.
- Added retransmit up to 7 days, with ability to retrieve data from log.
- Improved GPRS and Hydromet Cloud transmission reliability.
- Simplified GPRS configuration.
- Added support for EUMET satellite types when used with Satlink.
- Many more minor improvements and bug fixes.
Show Revision History
Revision & Release Date
3.21.0.3
Feb 23, 2018
9.89MB
Show Details
Upgrade Xpert2/9210B using SD Card
Change History
- Added support for SNTP time-synchronization
- Added ASCII Column format option to GPRS, Iridium, and Satlink transmissions
- Fixed a bug in the Modbus serial client (MBSensor and MBOut blocks), where blocks scheduled to run at the same time could eventually result in a failure to retrieve all the data for a scheduled slot. In this error case, the system would report, “Failed obtaining port lock”
- Fixed a bug where use of a log immediately following its creation (i.e., without rebooting the system), would cause a crash. This bug was introduced in 3.19.0.8.
3.21.0.3
Jan 31, 2017
9.80MB
Show Details
Upgrade Xpert2/9210B using SD Card
Change History
- Added support for SNTP time-synchronization
- Added ASCII Column format option to GPRS, Iridium, and Satlink transmissions
- Fixed a bug in the Modbus serial client (MBSensor and MBOut blocks), where blocks scheduled to run at the same time could eventually result in a failure to retrieve all the data for a scheduled slot. In this error case, the system would report, “Failed obtaining port lock”
- Fixed a bug where use of a log immediately following its creation (i.e., without rebooting the system), would cause a crash. This bug was introduced in 3.19.0.8.
3.21.0.3
Jan 31, 2017
9.80MB
Show Details
SD Card Upgrade Change History - Added support for SNTP time-synchronization
- Added ASCII Column format option to GPRS, Iridium, and Satlink transmissions
- Fixed a bug in the Modbus serial client (MBSensor and MBOut blocks), where blocks scheduled to run at the same time could eventually result in a failure to retrieve all the data for a scheduled slot. In this error case, the system would report, “Failed obtaining port lock”
- Fixed a bug where use of a log immediately following its creation (i.e., without rebooting the system), would cause a crash. This bug was introduced in 3.19.0.8.
3.20.0.8
Jan 10, 2017
9.80MB
Show Details
SD Card Upgrade
Change Highlights:
- Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 10, 2017
0 B
Show Details
SD Card Upgrade
Change highlights:
- Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 10, 2017
0 B
Show Details
SD Card Upgrade Change highlights: - Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 10, 2017
0 B
Show Details
SD card upgrade
Change highlights:
- Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 10, 2017
0 B
Show Details
SD card upgrade
Change highlights:
- Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 10, 2017
0 B
Show Details
SD card upgrade
Change highlights:
- Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 3, 2017
0 B
Show Details
SD card upgrade
Change highlights:
- Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 3, 2017
0 B
Show Details
SD card upgrade
Change highlights:
- Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 3, 2017
0 B
Show Details
SD card upgrade Change highlights: - Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 3, 2017
0 B
Show Details
SD card upgrade Change highlights: - Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 3, 2017
0 B
Show Details
SD card upgrade Change highlights: - Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 3, 2017
0 B
Show Details
SD card upgrade Change highlights: - Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 3, 2017
0 B
Show Details
Change highlights:
- Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.19.0.10
Dec 6, 2016
0 B
Show Details
Change highlights:
- Fixed bugs in GPRS SLL that could lead to communications lockup
- Minor improvements to LEADS and Nortek SLLs
- Prompt user to turn off recording when resizing or clearing a log
- Fixed minor memory leaks
- And more!
3.19.0.10
Jun 30, 2016
9.78MB
Show Details
Change highlights:
- Fixed bugs in GPRS SLL that could lead to communications lockup
- Minor improvements to LEADS and Nortek SLLs
- Prompt user to turn off recording when resizing or clearing a log
- Fixed minor memory leaks
- And more!
3.18.0.12
Jun 14, 2016
9.78MB
3.17.0.18
Oct 30, 2015
9.74MB
3.16.0.9
Jan 23, 2015
9.69MB
3.16.0.9
Oct 29, 2014
9.69MB
3.16.0.8
Sep 2, 2014
9.69MB
3.16.0.6
Jul 25, 2014
9.69MB
3.16.0.6
Jul 25, 2014
9.69MB
3.15.0.5
Jul 20, 2014
9.67MB
Apr 2, 2014
9.67MB
Show Details
8204-1091, file is labeled "SC" for storage card
|
|
Xpert2/9210B SD Card
File Name: Xpert2_v3.22.0.19_SC.zip
|
3.22.0.19 |
8080-0000-...
8080-0000-1B 8080-0000-2B 8080-0001-1B 8080-0001-2B
|
Feb 23, 2018 |
9.89MB |
Upgrade Xpert2/9210B using SD Card Change History
Upgrade Xpert2/9210B using SD Card Change History - Added transmit over LAN.
- Added retransmit up to 7 days, with ability to retrieve data from log.
- Improved GPRS and Hydromet Cloud transmission reliability.
- Simplified GPRS configuration.
- Added support for EUMET satellite types when used with Satlink.
- Many more minor improvements and bug fixes.
Show Revision History
Revision & Release Date
3.21.0.3
Feb 23, 2018
9.89MB
Show Details
Upgrade Xpert2/9210B using SD Card
Change History
- Added support for SNTP time-synchronization
- Added ASCII Column format option to GPRS, Iridium, and Satlink transmissions
- Fixed a bug in the Modbus serial client (MBSensor and MBOut blocks), where blocks scheduled to run at the same time could eventually result in a failure to retrieve all the data for a scheduled slot. In this error case, the system would report, “Failed obtaining port lock”
- Fixed a bug where use of a log immediately following its creation (i.e., without rebooting the system), would cause a crash. This bug was introduced in 3.19.0.8.
3.21.0.3
Jan 31, 2017
9.80MB
Show Details
Upgrade Xpert2/9210B using SD Card
Change History
- Added support for SNTP time-synchronization
- Added ASCII Column format option to GPRS, Iridium, and Satlink transmissions
- Fixed a bug in the Modbus serial client (MBSensor and MBOut blocks), where blocks scheduled to run at the same time could eventually result in a failure to retrieve all the data for a scheduled slot. In this error case, the system would report, “Failed obtaining port lock”
- Fixed a bug where use of a log immediately following its creation (i.e., without rebooting the system), would cause a crash. This bug was introduced in 3.19.0.8.
3.21.0.3
Jan 31, 2017
9.80MB
Show Details
SD Card Upgrade Change History - Added support for SNTP time-synchronization
- Added ASCII Column format option to GPRS, Iridium, and Satlink transmissions
- Fixed a bug in the Modbus serial client (MBSensor and MBOut blocks), where blocks scheduled to run at the same time could eventually result in a failure to retrieve all the data for a scheduled slot. In this error case, the system would report, “Failed obtaining port lock”
- Fixed a bug where use of a log immediately following its creation (i.e., without rebooting the system), would cause a crash. This bug was introduced in 3.19.0.8.
3.20.0.8
Jan 10, 2017
9.80MB
Show Details
SD Card Upgrade
Change Highlights:
- Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 10, 2017
0 B
Show Details
SD Card Upgrade
Change highlights:
- Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 10, 2017
0 B
Show Details
SD Card Upgrade Change highlights: - Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 10, 2017
0 B
Show Details
SD card upgrade
Change highlights:
- Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 10, 2017
0 B
Show Details
SD card upgrade
Change highlights:
- Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 10, 2017
0 B
Show Details
SD card upgrade
Change highlights:
- Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 3, 2017
0 B
Show Details
SD card upgrade
Change highlights:
- Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 3, 2017
0 B
Show Details
SD card upgrade
Change highlights:
- Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 3, 2017
0 B
Show Details
SD card upgrade Change highlights: - Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 3, 2017
0 B
Show Details
SD card upgrade Change highlights: - Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 3, 2017
0 B
Show Details
SD card upgrade Change highlights: - Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 3, 2017
0 B
Show Details
SD card upgrade Change highlights: - Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 3, 2017
0 B
Show Details
Change highlights:
- Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.19.0.10
Dec 6, 2016
0 B
Show Details
Change highlights:
- Fixed bugs in GPRS SLL that could lead to communications lockup
- Minor improvements to LEADS and Nortek SLLs
- Prompt user to turn off recording when resizing or clearing a log
- Fixed minor memory leaks
- And more!
3.19.0.10
Jun 30, 2016
9.78MB
Show Details
Change highlights:
- Fixed bugs in GPRS SLL that could lead to communications lockup
- Minor improvements to LEADS and Nortek SLLs
- Prompt user to turn off recording when resizing or clearing a log
- Fixed minor memory leaks
- And more!
3.18.0.12
Jun 14, 2016
9.78MB
3.17.0.18
Oct 30, 2015
9.74MB
3.16.0.9
Jan 23, 2015
9.69MB
3.16.0.9
Oct 29, 2014
9.69MB
3.16.0.8
Sep 2, 2014
9.69MB
3.16.0.6
Jul 25, 2014
9.69MB
3.16.0.6
Jul 25, 2014
9.69MB
3.15.0.5
Jul 20, 2014
9.67MB
Apr 2, 2014
9.67MB
Show Details
8204-1091, file is labeled "SC" for storage card
|