|
|
 |
 |
Products » Sensors » Water
Level & Water Quality » Submersible
Pressure Transducer 56-113 |
 |
| |
 SUBMERSIBLE
PRESSURE TRANSDUCER 56-114
|
| |
Highly
accurate solid state pressure transducer
measures air/dry gas pressures from 0 to
22 psi with a maximum pressure of 35 psi. |
| |
FEATURES
Specifically designed
to meet rigorous environments encountered
in down hole, stilling well, and other surface
water monitoring in down hole, stilling
well, and other surface water monitoring
applications
- Includes isolated diaphragm sensor
specifically for use with hostile fluids
and gases
-
Uses a silicon pressure
cell fitted into a stainless steel package
with an integral, compliant stainless
steel barrier diaphragm
- Low overall current draw ideal for long
term, remote monitoring systems
- Microprocessor based intelligent transducers
with high accuracy and SDI-12 output
- Housed in 316 SS case
-
High performance
internal signal conditioning providing
a 0.1% accurate output across the entire
temperature range of -10°C to 50°C
-
Kevlar strengthened,
polyurethane cable to provide a high
integrity, waterproof assembly with
no measurable elongation when lowered
into deep wells
-
Nose cone made of
delrin with a hydraulic damper to protect
the device from high pressure pulses
caused by underwater impact
APPLICATIONS
- Hydrological Down Hole, Hydrostatic
Pressure, Stilling Well, Weir Level
- Industrial - Tank Level
- Wastewater Lift Stations
|
SPECIFICATIONS
subject to change without
notice |
| Pressure
Range |
5,
15, 30, 50 psi |
| Accuracy |
±
0.1% FS (0.004 psi for 5 psi unit) referenced
to line from zero to full scale output;
includes all linearity, pressure hysterysis,
and repeatability errors. |
| Over
Pressure |
2
times rated pressure |
| Compensated
Temp Range |
-10°C
to +50°C |
| Temperature
Accuracy |
1°
C |
| Output
Resolution |
0.01°C |
| Excitation |
7.5
to 28.8 VDC |
Current
Draw
SDI-12 (Active)
Quiescent (Background Disabled) |
7.5mA
typical, 12mA maximum
0.25mA typ. |
| Output |
SDI-12
Version 1.2, (RS 485) |
|
| |
| Circuit |
| Protection |
Polarity,
surge, & shorted output |
| Diameter |
1.1
in. (28 mm) |
| Cable |
Polyurethane,
vented, Kevlar strength member |
| Housing |
316
SS, Delrin |
| Vent
Tube |
1/16
in. I.D. |
|
| |
ORDERING
| 56-114-05-25 |
Pressure Sensor, 5 PSI, 25 ft cable |
| 56-114-05-50 |
Pressure Sensor, 5 PSI, 50 ft cable |
| 56-114-05-100 |
Pressure Sensor 5 PSI, 100 ft cable |
| 56-114-15-50 |
Pressure Sensor, 15 PSI, 50 ft cable |
| 56-114-15-100 |
Pressure Sensor, 15 PSI, 100 ft cable |
| 56-114-15-150 |
Pressure Sensor 15 PSI, 150 ft cable |
| 56-114-15-200 |
Pressure Sensor, 15 PSI, 200 ft cable |
| 56-114-30-100 |
Pressure Sensor, 30 PSI, 100 ft cable |
| 56-114-30-150 |
Pressure Sensor, 30 PSI, 150 ft cable |
| 56-114-30-200 |
Pressure Sensor, 30PSI, 200 ft cable |
| 56-114-50-100 |
Pressure Sensor, 50 PSI, 100 ft cable |
| 56-114-50-150 |
Pressure Sensor, 50 PSI, 150 ft cable |
| 56-114-50-200 |
Pressure Sensor, 50 PSI, 200 ft cable |
| 5100-0452 |
Desiccant |
| 5100-0451 |
Dehumidifier, Aneroid Bellows |
| 6111-1037-1 |
Junction Box with Bellows |
|
|
|
|
|
