8080-0003-3 I/O WITH TERMINATION BOARD

• All features of the 8080-0003-1 above plus all connections are brought out via ribbon cable to a termination board.
• Multi-stage surge protection circuitry including spark gaps on termination board.
• Termination board grounds directly to metal mounting panel via standoffs.
  

8080-0007-1 10-CHANNEL ANALOG I/O

• 10 channels configurable as 10 single-ended channels or 5 differential inputs, or a combination of both
• 16 bit resolution
• Accepts inputs from -0.1V to +5V
• Measurement ranges: 0-5V, ±2.5V, ±78mV
• 1 (one) switched battery power output.
• 1 (one) reference output.
• Built-in multi-stage surge protection circuitry with spark gaps.

DIGITAL MODULES

8080-0002-1 DIGITAL I/O

• 1 (one) switched battery power output
• 8 digital I/O total, 6 are bi-directional, 2 are input only. Configurable for use as follows:
   Up to 8 general purpose sampled inputs, level sense with alarm or 32 bit event or frequency counters
   Up to 4 quadrature output sensors (quadrature requires 2 inputs per sensor)
   Built-in 100K pull-up on 6 inputs accommodates switch closure sensors such as a tipping bucket.
   2 switchable threshold RM Young wind-sensor-compatible inputs (low level AC signal).
   6 inputs accept switch battery voltage signals as well as 5V logic signals.
   6 open collector type outputs that can work with devices tied to 12V.

• All the same features as the 8080-0002-1 plus all the connections are brought out via ribbon cable to a termination board.
• Multi-stage surge protection circuitry including spark gaps on a termination board.
• Termination board grounds directly to metal mounting panel via standoffs.