Home
SatLink2-V2 Datasheet for GOES, No./So. America
Download (PDF)
SatLink2-1B
Satellites: INSAT/METSAT; METEOSAT 2nd Gen. (MSG); GMS /MTSAT; FY2C; ARGOS/SCD
Download (PDF)
SatLink2 Universal Manual
Download (PDF)
SatLink2 (all)
Ordering & Recommended Accessories, Antennae
 
SL2-V2 Features & Specifications (GOES)
SL2-1B Features & Specs (Worldwide Weather Satellites)

SL2 40 Watt Transmitter for Buoy Applications

SL2 Universal SetUp Guide
SL2 Universal Software History
Software Downloads & Updates
SL2 SatelliteTransmission Channels & Certification
SL2 Communicator & SatComm for Pocket PCs
Transmissions Set-Up & Data Handling
SatComm Measurements
Speech Files
SatComm Graphing
Engineering Bulletins
SL2 Power Point Presentation
LRGS Receive Systems
DRGS Receive Systems
GOES TELEMETRY
 
Products » Communications » SATLINK2 TRANSMITTER/LOGGER » DESCRIPTION
 
JAM-RESISTANT GPS BULLET ANTENNA FOR SL2
5000-0170
Download PDF Datasheet for Antenna

GPS Engineering Bulletin
GPS ANTENNA

FAQs

The GPS Bullet Antenna is a viable option...

1. When the cable length of the magnet mount antenna is not sufficient, the Bullet Antenna should be used. The new standard cable lenths for this antenna are 5 or 10 meters. (There is sufficient gain to go further although not supported.)

2. When an application requires a more robust cable (i.e., direct exposure to the elements), this antenna option provides a UV-rated cable approximately 0.3 inches in diameter.

3. In heavy urban environments or when nearby transmitters may overload a standard mag antenna, the Bullet inside filtering helps with interference issues.

4. The Bullet Antenna should be used in any location where the antenna must be mechanically mounted. Application examples include buoys, towers, ocean exposure, or anywhere with high winds or other problems that might move a magnetic antenna.

Can I still use the standard magnetic antenna?
SatLink 2 is shipped with a standard magnetic mount antenna and a 5 meter co-ax cable. Yes, the standard magnetic antenna is still a good performer. When mounting the standard antenna, consider:

1. Conduit for the tiny cable if there is direct outdoor exposure. The small size of the cable can allow for rodent damage or damage from branches rubbing, etc if installed directly.

2. Mount the antenna so it may be protected from any weather events that may dislodge the antenna. Different installation conditions may require other adjustments or options. Please contact Sutron Sales or Customer Service if you have any questions, (703)406-2800.

In order to install a station with the maximum possible unattended lifespan, please consider the following.

Option 1
Recommended for applications where interference near the GPS frequency band might cause jamming or loss of GPS reception. The antenna is also suited for marine environments & applications where a more rugged antenna is required. This antenna has a TNC connector allowing the use of special length cables. (Mounting hardware not included.)
Sutron Part #: 5000-0170-1

Option 2
Mounting Kit

This kit is designed to mount to existing Uni-Strut type mounting arms used at many stations. Included are a 4 inch stainless steel threaded pipe with a pair of Uni-Strut mounting brackets with hardware for mounting to a Uni-Strut tower arm. (Kit does not include the Uni-Strut arm on the tower, see below.)
Sutron Part #: 6211-1209-1

Option 3
Tower Mount Arm (Uni-Strut Solid Wall)
Length is 38 inches. Plating is Hot Dipped Galvanized. Remember to place the antenna in an open sky view location, i.e. away from the tower as much as possible.
Sutron Part #: 2271-1061-1

Option 4
Antenna Cable

A low-loss coaxial cable is provided with a TNC-male connector on one end and an SMA-male on the other end. Two lengths are available although the 5 meter is the preferred length if the extra length is not necessary:
5 Meter Length
Sutron Part # 6411-1561-1

10 Meter Length
Sutron Part # 6411-1561-2

SatLink2’s innovative design includes everything needed to collect high quality data, without
costly options. Our standard unit includes a Built-in Logger, SDI-12 Interface, dedicated Tipping Bucket Input, 4 Analog Inputs, & a powerful Mathematical Equation Editor.
 







Sutron Corporation    
22400 Davis Drive    
Sterling, VA 20164
[P] (703)406-2800   
[F] (703)406-2801     sales@sutron.com


QUESTIONS, PRICE QUOTATIONS,
SUGGESTIONS & COMMENTS

EMPLOYMENT OPPORTUNITIES

SALES ADMINISTRATOR: dtarr@sutron.com

CUSTOMER SERVICE: service@sutron.com



GS-25F6040D
SBSA