|
Xpert2/9210B SD Card
File Name: Xpert2_v3.22.0.19_SC.zip
|
3.22.0.19 |
Feb 23, 2018 |
9.89MB |
Upgrade Xpert2/9210B using SD Card
Upgrade Xpert2/9210B using SD Card
Change History
- Added transmit over LAN.
- Added retransmit up to 7 days, with ability to retrieve data from log.
- Improved GPRS and Hydromet Cloud transmission reliability.
- Simplified GPRS configuration.
- Added support for EUMET satellite types when used with Satlink.
- Many more minor improvements and bug fixes.
Show Revision History
Revision & Release Date
3.21.0.3
Feb 23, 2018
9.89MB
Show Details
Upgrade Xpert2/9210B using SD Card
Change History
- Added support for SNTP time-synchronization
- Added ASCII Column format option to GPRS, Iridium, and Satlink transmissions
- Fixed a bug in the Modbus serial client (MBSensor and MBOut blocks), where blocks scheduled to run at the same time could eventually result in a failure to retrieve all the data for a scheduled slot. In this error case, the system would report, “Failed obtaining port lock”
- Fixed a bug where use of a log immediately following its creation (i.e., without rebooting the system), would cause a crash. This bug was introduced in 3.19.0.8.
3.21.0.3
Jan 31, 2017
9.80MB
Show Details
Upgrade Xpert2/9210B using SD Card
Change History
- Added support for SNTP time-synchronization
- Added ASCII Column format option to GPRS, Iridium, and Satlink transmissions
- Fixed a bug in the Modbus serial client (MBSensor and MBOut blocks), where blocks scheduled to run at the same time could eventually result in a failure to retrieve all the data for a scheduled slot. In this error case, the system would report, “Failed obtaining port lock”
- Fixed a bug where use of a log immediately following its creation (i.e., without rebooting the system), would cause a crash. This bug was introduced in 3.19.0.8.
3.21.0.3
Jan 31, 2017
9.80MB
Show Details
SD Card Upgrade
Change History
- Added support for SNTP time-synchronization
- Added ASCII Column format option to GPRS, Iridium, and Satlink transmissions
- Fixed a bug in the Modbus serial client (MBSensor and MBOut blocks), where blocks scheduled to run at the same time could eventually result in a failure to retrieve all the data for a scheduled slot. In this error case, the system would report, “Failed obtaining port lock”
- Fixed a bug where use of a log immediately following its creation (i.e., without rebooting the system), would cause a crash. This bug was introduced in 3.19.0.8.
3.20.0.8
Jan 10, 2017
9.80MB
Show Details
SD Card Upgrade
Change Highlights:
- Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 10, 2017
0 B
Show Details
SD Card Upgrade
Change highlights:
- Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 10, 2017
0 B
Show Details
SD Card Upgrade
Change highlights:
- Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 10, 2017
0 B
Show Details
SD card upgrade
Change highlights:
- Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 10, 2017
0 B
Show Details
SD card upgrade
Change highlights:
- Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 10, 2017
0 B
Show Details
SD card upgrade
Change highlights:
- Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 3, 2017
0 B
Show Details
SD card upgrade
Change highlights:
- Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 3, 2017
0 B
Show Details
SD card upgrade
Change highlights:
- Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 3, 2017
0 B
Show Details
SD card upgrade
Change highlights:
- Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 3, 2017
0 B
Show Details
SD card upgrade
Change highlights:
- Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 3, 2017
0 B
Show Details
SD card upgrade Change highlights:
- Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 3, 2017
0 B
Show Details
SD card upgrade
Change highlights:
- Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.20.0.8
Jan 3, 2017
0 B
Show Details
Change highlights:
- Added new “WtrDns” block to calculate sea water density using salinity (PSU), temp (C), and pressure (decibars)
- Fixed a bug where logging would fail in an EzSetup measurement that had a Measurements to Log value greater than 1 while having a Time offset of something other than 00:00:00
- INSAT formatter now corrects overflow values by setting max value, rather than assigning a junk value
- Logger now waits at least a minute in between requests to Satlink for transmission window close time
- LogRec block now provides the record as a text string at output 3
3.19.0.10
Dec 6, 2016
0 B
Show Details
Change highlights:
- Fixed bugs in GPRS SLL that could lead to communications lockup
- Minor improvements to LEADS and Nortek SLLs
- Prompt user to turn off recording when resizing or clearing a log
- Fixed minor memory leaks
- And more!
3.19.0.10
Jun 30, 2016
9.78MB
Show Details
Change highlights:
- Fixed bugs in GPRS SLL that could lead to communications lockup
- Minor improvements to LEADS and Nortek SLLs
- Prompt user to turn off recording when resizing or clearing a log
- Fixed minor memory leaks
- And more!
3.18.0.12
Jun 14, 2016
9.78MB
3.17.0.18
Oct 30, 2015
9.74MB
3.16.0.9
Jan 23, 2015
9.69MB
3.16.0.9
Oct 29, 2014
9.69MB
3.16.0.8
Sep 2, 2014
9.69MB
3.16.0.6
Jul 25, 2014
9.69MB
3.16.0.6
Jul 25, 2014
9.69MB
3.15.0.5
Jul 20, 2014
9.67MB
Apr 2, 2014
9.67MB
Show Details
8204-1091, file is labeled “SC” for storage card
|