Captcha
View our Privacy Policy
Feedback





Captcha
View our Privacy Policy
Feedback

Xpert Digital I/O Module with Surge Protection Board

Loading...

Xpert Digital I/O Module with Surge Protection Board

    • 1 (one) switched battery power output (100 mA rating)
    • 8 digital I/O total, 6 are bi-directional, 2 are input only. Configurable for use as follows:
    • -Up to 8 general purpose sampled inputs, level sense with alarm or 32 bit event or frequency counters
    • -Up to 4 quadrature output sensors (quadrature requires 2 inputs per sensor)
    • -Built-in 100K pull-up on 6 inputs accommodates switch closure sensors such as a tipping bucket.
    • -2 switchable threshold RM Young wind-sensor-compatible inputs (low level AC signal).
    • -6 inputs accept switch battery voltage signals as well as 5V logic signals.
    • -6 open collector type outputs that can work with devices tied to 12V.  Includes 100 ohm current limiter. (70 mA max current)
    • Maximum input frequency:  1 kHz
    • Minimum pulse width for inputs:  500 uS
    • Industrial temperature range operation –40 to +60 C
    • Module adds a termination board that provides automatically resetting multi-stage protection circuitry capable of handling up to 20 kA (8/20 uS)

    • Multi-stage circuitry
    Automatically resets after surge
    • Operating temperature
    -40°C to +60°C
    • Accepts wire sizes (*input side)
    26-14 AWG
    • Accepts connection (#output side)
    0.1” centerline ribbon cable
    • Series resistance (Analog I/O)
    10 ohms
    • Power handling
    (8/20 uS) 20 kAmps
    • Clamping voltage
    36 V
    • Maximum line voltage (Analog I/O)
    22 V
    • Device Dimensions
    5” x 4.5” x 1.3″
    • Weight
    .5 lbs.

Featured Products