Captcha
View our Privacy Policy
Feedback





Captcha
View our Privacy Policy
Feedback

Wind Speed & Direction Sensor

Loading...

Wind Speed & Direction Sensor

    • Consistent performance, no accuracy degradation from wear of moving parts
    • Corrosion free, uv resistant material
    • Low start speed (0.01 m/s, 0.09 knots)
    • Maintenance free
    • No calibration required
    • Robust construction
    • Software configurable
    • Status code output
    • True 0° – 360° operation (no dead band on direction output)
    • Wind speed and direction from a single unit
    • Economic to use
    • Land-based or marine applications
    • Multiple WindSonics may be connected via one cable to a single SDI-12 data logger port.
    • Greater distances with SDI-12 than those possible with analogue voltage outputs
    • SDI-12 WindSonic interfaces with any SDI-12 compatible data logger.
    • Reduced risk of data corruption – an SDI-12 digital signal is less likely to be corrupted by external interference than analogue signals.
    • Avoid proprietary protocol or custom wiring and programming of data loggers.
    • Power supply to the WindSonic may be supplied through a single data cable.
    • Widely used in water resource research by government, industry and agricultural organizations
    • Ag-Met
    • Pollution Control
    • Automatic Weather Stations
    • Utilities
    • Hydro-Met
    • HVAC

    WIND SPEED
    • Range
    0 – 60 m/s
    • Accuracy
    ±2%
    • Resolution
    0.01 m/s
    WIND DIRECTION
    • Range
    0° – 360°, no dead band
    • Accuracy
    ±3°
    • Resolution
     1°
    Outputs
    • Output
    1, 2 or 4 outputs/second
    • Parameters
    Wind speed & direction or UV
    • Units
    m/s, knots, mph, kph, ft/min
    • Option 1
    RS232
    • Option 2
    RS232 + RS422 + RS485
    • Option 3
    RS232 + RS422 + RS485 0-5V or 4-20mA
    • Option 4
    SDI-12
    Anemometer Status Message is part of standard output .
    Power Requirement
    • Anemometer
    9-30Vdc @ 40mA
    • MTBF
    10 years
    • Materials
    Luran S KR 2861/1C ASA/PC
    • Weight
    .5 kg (1 pound)
    • Mounting
    Pipe Mounting 44.45 mm (1.75 inches diameter)
    Environmental
    • Moisture Protection
    IP65
    • Operating Temperature
    -35° to +70° C
    • Storage Temperature
    -40° to +90° C
    • Operating Humidity
    <5% to 100%
    • EMC
    BS EN 50081-1: 1992 (EmissionsClass B),  BS EN 50082-1: 1997 (Immunity)

Featured Products