Captcha
View our Privacy Policy
Feedback





Captcha
View our Privacy Policy
Feedback

Ultrasonic 2-Axis Wind Sensor (AWOS) 5600-0210-AV

Loading...

Ultrasonic 2-Axis Wind Sensor (AWOS) 5600-0210-AV

    •  Meets ICAO Requirements when supplied as part of a AWOS
    • Accepted by FAA & CAA
    • Decreased down time & service costs
    • Continuous operation in extreme weatherconditions
    • Reduced set up and installation time
    • No moving parts
    • Can be configured to exact requirements including analog outputs
    • Meets stringent performance critieria specified by international meteorological, naval and airport authorities
    • Enhanced anti-icing design Analog outputs
    • Analog outputs
    • NMEA output
    • User selectable output format
    • Sonic temperature
    • 1, 4, or 10 Hz output
    • Communications software
    • Calibration to international standard
    • Meteorological
    • Wind turbines
    • Transport
    • Tunnels
    • Highways
    • Bridges
    • MIlitary
    • Marine
    • Aviation

     SPECIFICATIONS Specifications subject to change without notice 
    MEASUREMENT
    Output 1 Hz, 4 Hz, 10 Hz
    Parameters UV, Polar, NMEA, Tunnel
    Units m/s, Knots, MPH, KPH, ft./min.
    Averaging Flexible 1-3600 seconds
    WIND SPEED
    Range 0 -70 m/sec (157 mph) 0- 75 m/sec ( 168 mph)
    Accuracy 2%
    Resolution 0.01 m/sec
    Offset ±0.01 m/sec
    WIND DIRECTION
    Range 0 – 359°
    Accuracy ± 2°
    Resolution
    SONIC TEMP. OUTPUT Range: -40°C to +70°C
    ANEMOMETER STATUS Part of standard message
    STARTING THRESHOLD 0.01 m/sec
    DEAD BAND WIND DIR. None
    POWER REQUIREMENT Anemometer only 9 – 30 VDC @ 40mA @ 12 VDC Heating – Optional 3A @ 24V AC or DCV
    DIGITAL OUTPUT
    Communication RS422, full duplex, network facility
    Baud rates 1200, 2400, 4800, 9600, 19200, 38400
    Formats 8 data, odd, even, or no parity
    ANALOG OUTPUT – OPTIONAL
    Quantity 3 (speed, direction, status or sonic temperature)
    Scale Multiples of ±10m/s up to ± 70 m/s
    Type ± 2.5V, 0-5V or 4-20mA
    V output resistance 60 Ohms
    4-20mA loading 10-300 Ohms
    DIMENSIONS
    Weight 1.5 lbs. (.69 kg)
    Size 405 mm high x 210 mm wide
    EXTERNAL MATERIALS Stainless Steel 316
    ENVIRONMENTAL
    Moisture Protection IP66 (NEMA4X)
    Operating Temp -55°C to +70°C
    Humidity 5% to 100% RH
    Precipitation 300mm/hr
    Icing MILSTO810E Method 521.1 Procedure 1
    STANDARDS Traceable to NAMAS standards
    SITE CALIBRATION None required
    CERTIFICATION EMC tested BSEN 50081-1 1992 (Emissions class B)
    BSEN 50082-2 1992 (Immunity) Worldwide distribution
    MTBF 10 years

Featured Products