Captcha
View our Privacy Policy
Feedback





Captcha
View our Privacy Policy
Feedback

Iridium® Short Burst Data (SBD) Transceiver

Loading...

Iridium® Short Burst Data (SBD) Transceiver

    • With a low cost per byte, adding Iridium® telemetry to any remote station is very affordable.
    • Two-way communications – collect data & make station changes remotely
    • Small equipment size – fits in tight spaces
    • Small antennas – easy to conceal
    • Pole-to-pole global coverage – operates anywhere
    • SBD (Short Burst Data) communications protocol
    • Fully integrated into many Sutron loggers – simple to configure and use. Includes the Monitor, 8310 & Xpert. Integration provides control of the transmission schedule & data formatting, diagnostics for test transmissions & receiving messages.
    • Data delivered via e-mail or direct IP
    • Low Cost Worldwide Coverage Each Iridium® Transceiver can be configured to provide data to up to 5 destinations via e-mail or directIP. This allows the central collection of data from stations located anywhere in the world up to 5 delivery points per station.
    • Low cost data Service Plans available from Sutron
    • Enhanced Data Delivery – Let Sutron receive, decode and host your data. Sutron developed SutronWIN to handle all the work necessary to receive, process, store, and display your data. Sutron offers SBD services both with and without SutronWIN support.
    • IRIDIUM World Data Services
    • Land & Marine Mobile Services
    • Enhanced Mobile Satellite Services (EMSS) for US DoD: EMSS is a DoD enhancement providing low rate voice & data services & allowing for end-to-end encryption, interface to secure telephone equipment (STU/ STE), & protection of sensitive user information. Authorized user terminals (handsets) support secure communications by adding a removable NSA-approved Communications Security (COMSEC) sleeve connected directly to an authorized user terminal. DoD users include the U.S. Army Corps of Engineers.
    • Global LRIT* Services: Zero equipment interference & reliable everywhere, the Iridium LRIT application is dedicated, costeffective, low latency & secure. It combines high-quality, low-latency pole-to-pole coverage with low-cost equipment based on Short Burst Data (SBD) Transceiver. *Long Range Identification & Tracking

    MECHANICAL
    • Dimensions
    4.00” x 2.35” with mounting holes 1.7”x3.625”
    • Weight
    80gms
    • RS232 Connector
    DB9 M (DCE) and 2×5 Shrouded, 0.1 inch spacing
    • Antenna Connector
    SMA Female
    • Power Connector
    pin 9 of RS232 or 2 pin molex
    • Enclosure
    optional
    ELECTRICAL
    • Input Voltage
    8v-20VDC @0.6amp max
    • Power Consumption
    @12v Peak During Tx – 170mAAvg Idle – 29 mA (Connected to Network) During Tx – 130 mA Standby – 1mA
    • Status LED
    Red – Standby Green – Connected to Network Yellow – Connecting
    IRIDIUM TRANSCEIVER
    • FCCID
    TBD
    • Frequency
    1618 to 1626.5MHz
    • SBD Mobile Originated
    340 bytes max
    • SBD Mobile Terminated
    270 bytes max
    ENVIRONMENTAL
    • Operating Temperature:
    -40 to +60°C
    • Operating Humidity
    <75% RH
    • Height
    6 in. (15.3 cm.)
    • Length
    3 in. (7.7 cm.)
    • Width
    1 in. (2.6 cm.)
    • Weight
    .55 lbs. (.25 Kg)

Featured Products