Captcha
View our Privacy Policy
Feedback





Captcha
View our Privacy Policy
Feedback

Gill Instruments Ultrasonic 2-Axis Wind Sensor 5600-0210

Loading...

Gill Instruments Ultrasonic 2-Axis Wind Sensor 5600-0210

    • Decreased down time & service costs
    • Continuous operation in extreme weather conditions
    • Reduced set up and installation time
    • No moving parts
    • Can be configured to exact requirements including analog outputs
    • Meets stringent performance criteria specified by international meteorological, naval and airport authorities
    • Enhanced anti-icing design
    • Analog outputs
    • NMEA output
    • User selectable output format
    • Sonic temperature
    • 1, 4, or 10 Hz output
    • Communications software
    • Calibration to international standard

    MEASUREMENT
    • Output
    1 Hz, 4 Hz, 10 Hz
    • Parameters
    UV, Polar, NMEA, Tunnel
    • Units
    m/s, Knots, MPH, KPH, ft./min.
    • Averaging
    Flexible 1-3600 seconds
    WIND SPEED
    • Range
    0 – 65 m/sec (0-145mph)
    • Accuracy
    2%
    • Resolution
    0.01 m/sec
    • Offset
    ±0.01 m/sec
    WIND DIRECTION
    • Range
    0 – 359°
    • Accuracy
    ± 2°
    • Resolution
    SONIC TEMPERATURE OUTPUT
    • Range
    -40°C to +70°C
    • ANEMOMETER STATUS
    Part of standard message
    • STARTING THRESHOLD
    0.01 m/sec
    • DEAD BAND WIND DIR.
    None
    • POWER REQUIREMEN T
    Anemometer only 9 – 30 VDC @ 40mA @ 12 VDC
    Heating – Optional 3A @ 24V AC or DCV
    DIGITAL OUTPUT
    • Communication
    RS422, full duplex, network facility
    • Baud rates
    1200, 2400, 4800, 9600, 19200, 38400
    • Formats
    8 data, odd, even, or no parity
    ANALOG OUTPUT – OPTIONAL
    • Quantity
    3 (speed, direction, status or sonic temperature)
    • Scale
    Multiples of ±10m/s up to ±70 m/s
    • Type
    ± 2.5V, 0-5V or 4-20mA
    • V output resistance
    60 Ohms
    • 4-20mA loading
    10-300 Ohms
    DIMENSIONS
    • Weight
    1.5 lbs. (.69 kg)
    • Size
    405 mm high x 210 mm wide
    MATERIALS
    • External
    Stainless Steel 316
    ENVIRONMENTAL
    • Moisture Protection
    IP66 (NEMA4X)
    • Operating Temp
    -55°C to +70°C
    • Humidity
    5% to 100% RH
    • Precipitation
    300mm/hr
    • Icing
    MILSTO810E Method 521.1 Procedure 1
    • STANDARDS
    Traceable to NAMAS standards
    • SITE CALIBRATION
    None required
    • CERTIFICATION
    EMC tested BSEN 50081-1 1992 (Emissions class B). BSEN 50082-2 1992 (Immunity) Worldwide distribution.
    • MTBF
    10 years

Featured Products