Accubar® Gauge Pressure Sensor -0125 – Legacy Product

Ordering and Shipping Info
Highly accurate solid state pressure transducer measures air/dry gas pressures from 0 to 22 psi with a maximum pressure of 35 psi.

Mercury manometer replacement
Pressure activated control applications
Ideal for remote monitoring applications
Supports SDI-12
With 5600-0126 chart drive, the Accubar can drive chain or tape driven devices including chart recorders.
Quadrature output connects to data recorders.
Durable aluminum case
DB-9 female connector, for RS-232
8 position terminal block
Fitting for a 1/8 in.OD tubing
Low power consumption
Low maintenance requirement

Datasheets

	File Name	Revision Number	Release Date	File Size	Description

–

Feb 3, 2016

101.63KB

Manuals

	File Name	Revision Number	Release Date	File Size	Description

–

May 23, 2014

405.04KB

Power Consumption
Range	0 to 22 psi (0 to 50 feet of water)
Temperature	-40°C to +60°C
Vibration	0.5g @ 10-50 Hz
Over Pressure	35 psi
Units Supported	ft of H20, cm of H20, psi, kPa, user specified
Resolution	0.0001 psi (0.0001 ft of water)
Accuracy	0.1% of reading above 4.4 psi (10ft H20) 0.0044 psi (0.01ft H20) below 4.4 psi
Power Supply	8 to 28 VDC (reverse polarity protected)
(-7) :RS-232	17 mA typ
(-7) :SDI-12	6 mA typ
(-7) :Standby	0.2 mA typ
(-8) :RS-232	18 mA typ
(-8) :SDI-12	9 mA typ
(-8) :Standby	8 mA typ
Power specifications under no-load conditions
Output
(-7)	RS-232, SDI-12, quadrature
(-8)	RS-232, SDI-12, quadrature, Analog 0-5VDC
RS-232 Data	Continuous or on demand
Baud Rate	1200 baud
Averaging Time	0 to 240 seconds (user selectable)
Pressure Fitting	Fitting for 1/8 in. OD tubing
Overpressure Protection
Internal blow-off valve trips at 30 psi nominal
Dimensions	3.14 in. x 4.92 in. x 2.24 in. excluding connectors
Weight	1.5 lbs
Electrical Connection	8 position terminal block and DB-9
Media Compatibility	Air or dry gas